*The PowerEdge 1950/2950/2900 support booting to a USB flash drive. = True False *True/False: The SAS5/iR in the PowerEdge 1950/2900/2950 support Raid 5. True = False *Which type of hard disk drives are supported on the PowerEdge 1950? 3.5 inch SAS and 3.5 inch SATA 3.5 inch SAS 2.5 inch SATA and 3.5 inch SATA 2.5 inch SAS and 3.5 inch SATA = 3.5 inch SAS, 2.5 inch SAS and 3.5 inch SATA *Which color denotes hot-plug devices on the PowerEdge 1950, 2950, and 2900? Red Blue Green = Terra cotta / orange *Which type of hard disk drives are supported on the PowerEdge 2950? 2.5 inch SAS and 3.5 inch SATA = 3.5 inch SAS, 2.5 inch SAS and 3.5 inch SATA 3.5 inch SAS 2.5 inch SATA and 3.5 inch SATA 3.5 inch SAS and 3.5 inch SATA *Which type of hard disk drives are supported on the PowerEdge 2900? 3.5 inch SAS, 2.5 inch SAS and 3.5 inch SATA. 3.5 inch SAS 2.5 inch SATA and 3.5 inch SATA * 3.5 inch SAS and 3.5 inch SATA 2.5 inch SAS and 3.5 inch SATA *Which of the following FRUs are hot-pluggable in the PowerEdge 2950? = Power supplies CD-ROM = Fans Floppy-disk drive *Which color denotes a touch point or removable devices on the PowerEdge 1950, 2950, and 2900 that is not hot-pluggable? Green Terra cotta = Blue Red Which DIMMs are used for the spare memory in a memory sparing configuration in the PowerEdge 1950, 2950, or 2900? = DIMMs one through four DIMMS one through two DIMMs one through eight DIMMs one through six ----When sparing is used, how much of the spare memory is reserved in the PowerEdge 1950, 2950, or 2900? One rank per DIMM for DIMMs one through four = Two ranks per DIMM for DIMMs one through four Two ranks per DIMM for DIMMs one and two One rank per DIMM for DIMMs one through eight How must DIMS be installed in the PowerEdge 1950, 2950, or 2900? All DIMMs must be installed in branch 0 before populating branch 1. DIMMs must be installed in matched quads by branch DIMMs must be installed in matched pairs by branch All DIMMs must be installed in channel 0 before populating channel 1 *Which of the following expansion slots are available in the PowerEdge 2900? PCI-e only = PCI-e and PCI-x AGP and PCI-e PCI-x only ---+Mike has a question about purchasing a PowerEdge 1950 configuration. Mike has one PCI-e adapter that he needs to put into each PowerEdge 1950 he purchases. Which riser option should you recommend to Mike? == PCI-e center riser and PCI-e left riser since this is the ideal configuration for a PowerEdge 1950 that requires PCI-e support PCI-X center riser and PCI-e left riser since the left riser is slot one and Mike will likely see his best performance in this configuration PCI-X center riser and PCI-X left riser since PCI-e cards are backwards compatible with PCI-X. CI-e center riser and PCI-X left riser since the center riser is slot one and Mike will likely see his best performance in this configuration *Which network card is integrated on the PowerEdge 2900? = Broadcom BCM5708 Intel 83451E1 Intel 82450 Broadcom BCM5704 *Multiple choice: Which video controller is integrated on the system board of the PowerEdge 2950? RAGE ATI ATI Radeon 7000-M = ES1000 ATI XGI XG20 PCI *How many riser cards are available on the PowerEdge 2950? Three = One None Two *How many USB ports are on the front of the PowerEdge 1950? One Four None = Two *On the PowerEdge 1950, the system setup can be accessed by pressing F12 during POST. True = False *Why is it recommended to wait a period of time before removing the memory from a PowerEdge 1950, 2950, or 2900? To allow the FB-DIMMs to normalize To allow the static to discharge from the memory To allow the system board capacitance to discharge = To allow the AMB time to cool down On the PowerEdge 1950, the system setup can be accessed by pressing F12 during POST. = False True --Which DIMMs are used for the spare memory in a memory sparing configuration in the PowerEdge 1950, 2950, or 2900? DIMMs one through six DIMMs one through eight DIMMS one through two = DIMMs one through four ------!!How must DIMS be installed in the PowerEdge 1950, 2950, or 2900? DIMMs must be installed in matched quads by branch xxxxx DIMMs must be installed in matched pairs by branch =+ All DIMMs must be installed in branch 0 before populating branch 1. All DIMMs must be installed in channel 0 before populating channel 1 *Rob reports that his PowerEdge 2900 will not POST. Rob says that he has no video on the screen, but the fans do appear to spin up on the system. What should you ask Rob to do to get more information about what may be causing the no POST issue? Ask Rob to unplug the system, wait five minutes, and then hold the power button down for 30 seconds to clear the systems NVRAM. Ask Rob to connect to the BMC and use the SOL proxy utility to review the systems SEL log, and then reference the SEL entries against the SEL reference found in the hardware owner’s manual. = Press and hold the ID button for 5 seconds to display the BIOS progress code on the LCD, and then reference this code against the LCD status messages reference found in the hardware owners manual. Ask Rob to connect to the BMC using the impish command to review the systems SEL log, and then reference the SEL entries against the SEL reference found in the hardware owner’s manual. *Henry is upset that he just received his PowerEdge 2950s, and all of the systems came with RapidRails. He says he ordered VersaRails because they are required for his installation. How should you handle this situation? Apologize for the mix up, and tell him to call Dell. Apologize for the mix up and call Dell to set up exchanges for VersaRails. = Ask Henry to get a set of the rails out of the box and explain to him how to convert them from RapidRails to VersaRails. Apologize for the mix up, provide Henry with the correct part number and tell him call sales in order to get the mix up corrected.