How many data cartridge slots are available in an SDLT version PowerVault 136T with all optional columns installed and the door configured for mailbox?

v  Fifty 
   Seventy-Two 
   Sixty 
   Fourty-Five 

Which one of the following settings is NOT valid when partitioning a PV132T?

   Partition Enable 
   Drive Mode 
v  Library Mode 
   Slot Configuration 

Which if the following PV136T components have Serial Ports?

   Tape Drive Module 
v  FC Bridge 
v  SCSI Host Interface PCBA 
v  RMU 

On a PowerVault 136T, how is the Fibre Channel Bridge's IP Address configured?

v  HyperTerminal session using a null modem cable. 
   Through the RMU web interface. 
   HyperTerminal session using a straight-through cable. 
   Through the control panel of the PowerVault 136T. 

Which of the following methods can be used to flash the library firmware of a PowerVault 136T?

v  RMU 
v  Library Serial Port 
   PV-Tools 
v  Dell Library & Tape Tools 

On a PowerVault 136T, how is the Fibre Channel Bridge's IP Address configured?

   Through the RMU web interface. 
   Through the control panel of the PowerVault 136T. 
v  HyperTerminal session using a null modem cable. 
   HyperTerminal session using a straight-through cable. 

What are the requirements for enabling LUN partitioning on a PowerVault 132T with two LTO2 drives installed?

v  Library firmware version 227D and LTO2 drive firmware version 37RH. 
   All firmware versions support LUN partitioning. It needs to be enabled through the PV132T's setup menu. 
   Library firmware version 224D and LTO2 drive firmware version 29C4. 
   The LTO2 drive does not support LUN partitioning. 

Which component is used to attach a PV136T LTO Library to a SAN?

   RMU 
v  FC Bridge 
   PV35F 
   PV211S 

On a server attached to a PV136T LTO Library, a user is able to remotely access the Operator Panel through the RMU.

   False 
v  True 

What is the difference between SNC manager versions 3.2.1 and 3.2.2?

   SNC manager 3.2.2 adds support for TapeWare 2.2 on a SAN. 
v  SNC manager 3.2.2 adds support for the PV 136T SNC-2. 
   SNC manager 3.2.2 adds support for partitioning on the PV 132T. 
   SNC manager 3.2.2 adds support for ArcServe 9.0 on a SAN. 

If you cannot enable LUN partitioning on a PowerVault 132T with SDLT-320 drives installed, what is the problem?

   The tape drives are not terminated correctly. 
   The SDLT-320 drives do not have the correct firmware installed. 
v  None, the SDLT 320 drive does not support LUN partitioning. 
   The host does not have the correct driver installed.