?After running the integrated cable test on the PowerConnect 2708/2716/2724 switch, the message 'Short Cable' indicates:

   the test completed OK.  
 a shorter cable is required for the test to complete. 
X a short has occurred in the cable. 
 the cable is too short to test for faults. 



The optical transceiver diagnostics on the PowerConnect 2724 switches can perform which of the following tests.

=   temperature 
 humidity 
= transmitter fault 
= voltage 




Pressing the managed mode button on a PowerConnect 2708/2716/2724 switch will erase any user defined switch settings.

   False 
= True 



A DHCP server must be active on the network before the PowerConnect 2708/2716/2724 switches can obtain a DHCP address.

   False 
= True 



To manage the PowerConnect 2708/2716/2724 switches, which connection method is supported?

   telnet 
= web interface 
 hyperterminal 
 secure shell (SSH) 


What is the default username and password for the PowerConnect 2708/2716/2724?

 'user','password' 
 'administrator', 'password' 
= 'admin', with no password 
 'admin','admin' 



The PowerConnect 2708/2716/2724 switches are configured from the factory in 'unmanaged mode'.

   False 
= True 


The PowerConnect 2708/2716/2724 is managed via a Web-based graphical user interface (GUI) and command line interface (CLI).

   True 
=? False 


The RPS-600 is supported on the PowerConnect 2708/2716/2724 switches.

=   False 
 True 


The PowerConnect 2708 can perform optical transceiver diagnostics.

   False 
= True 


The PowerConnect 2708/2716/2724 supports MDI/MDIX and is non-configurable.

   False 
= True 

The PowerConnect 2708 supports 'jumbo frames'.

   False 
= True 

What is the default IP address for the PowerConnect 2708/2716/2724 managed switch?

   192.168.25.1 
 192.168.1.1 
= 192.168.2.1 
 192.168.100.100 

Changing from 'unmanaged mode' to 'managed mode', on a PowerConnect 2708/2716/2724, activates the management graphical user interface and sets the system back to factory defaults.

  False 
= True