1   Multiple choice: (V6)The white RPS connector on the back of the PowerConnect 5224 is used for:  
 
 
  managing the switch.  
 cascading switches.  
 downloading firmware to the switch.  
= connecting to a redundant power system. 
 
 
 
 2   True/False(V6)Configuration changes made to the PowerConnect 5212 running-config are automatically stored in non-volatile memory.  
 
 
  TRUE 
 =FALSE 
 
 
 
 3   Multiple choice: (V6)What is the default IP address of a PowerConnect 5212? 
 
 
  =0.0.0.0 
 10.1.1.1 
 10.3.2.1 
 192.16.0.1 
   
 
 
 4   True/False(V6)The PowerConnect 5224 has a red power LED illuminated when the internal power supply has failed.  
 
 
=  TRUE 
 FALSE 
 
 5   Choose all that Apply(V6)What two files can the customer upgrade without support intervention on a PowerConnect 5212?  
 
 
  loader file  
diag file  
=config file 
=opcode file 
 
 
 6   "True/False(V6)When using Telnet, changes made to the running configuration will automatically be saved to the startup configuration on a PowerConnect 3248. " 
 
 
  TRUE 
 =FALSE 
 
 
 7   Multiple choice: (V6)What command saves the PowerConnect 5212 switch's running configuration to the startup configuration?  
 
 
  copy start-cfg running-cfg  
 move running-conf startup-conf  
 save running-cfg startup-cfg  
 =copy running-config startup-config 
 
 
 
 8   "Multiple choice: (V6)What is the default username and password, to manage the PowerConnect 3248 in Privileged Exec mode?" 
 
 
  "'user','privilege'" 
= "'admin','admin' " 
 "'administrator', blank password" 
 "'admin', 'password'" 
 
 9   "Multiple choice: (V6)If a PowerConnect 5224 switch reports an 'Invalid IP address' while configuring the switch's IP address, you should: " 
 
 
  replace the switch.  
 reboot the switch.  
 update the firmware on the switch.  
 =use a different IP address. 
 
 
 

 
 10   Multiple choice: (V6)What command would test basic connectivity of a PowerConnect 5224 switch?  
 
 
  ipconfig 
 path 
 nbtstat 
 =ping 
 
 
 11   Multiple choice: (V6)What tool is required when replacing a PowerConnect 5224 mounted in a Dell rack? 
 
 
  Flathead Screwdriver 
 =#2 Phillips-Head Screwdriver 
 5/8' Open Ended Wrench 
 T-20 Torx Driver 
 
 
 
 
 
 12   Multiple choice: (V6)What type of serial cable must be used when connecting to the PowerConnect 3248?  
 
 
  Firewire cable 
 =Modem serial cable 
 USB cable 
 Straight-through serial cable  
 
 
 13   "True/False(V6)After replacing a PowerConnect 3248, the switch's web interface can be accessed without first configuring the IP address via the serial cable. " 
 
 
  =FALSE 
 TRUE 
 
 

14   True/False(V6)The PowerConnect 5212 has 24 one gigabit Ethernet port.  
 
 
  =FALSE 
 TRUE 
 
 
15   "Multiple choice: (V6)When logged in to a PowerConnect 3248 as 'guest', Ethernet port settings can be adjusted via HyperTerminal. " 
 
 
  TRUE 
= FALSE 
 
 16   "Multiple choice: (V6)Port 5 on the PowerConnect 5224 switch has an FDX LED that is NOT illuminated and the LNK/ACT is randomly blinking orange, which indicates that port 5 is: " 
 
 
  =configured to 10/100Mbps at half-duplex. 
 having collision errors.  
 not connected to any devices.  
 connected with a crossover cable.  
 
 
 17   "Multiple choice: (V6)When managing the PowerConnect 5212 switch through a web browser, where can you determine if a specific port has 'Fast Link' enabled? " 
 
 
  System -> Link Aggregation -> Trunk Settings  
 System -> Spanning Tree -> Port Settings  
 =System -> Ports -> Configure  
 System -> VLAN -> Port Configuration 
 
 
 18   "Multiple choice: (V6)In the absence of SNMP management software, what type of file transfer server must be used to update the PowerConnect 3248 firmware? " 
 
 
  HTTPS  
 HTTP  
= TFTP 
 FTP 
 
 19   True/False(V6)The default administrative VLAN for a PowerConnect 5212 is VLAN 0.  
 
 
  TRUE 
= FALSE 
 20   Choose all that Apply(V6)What components are field replaceable on the PowerConnect 5212?  
 
 
  =SFP 
=Network Switch 
Fan pack  
Power Supply