90 %

Á¶¿ëÁø


1   True/False The PowerConnect 6024 supports the Spanning Tree Protocol. 
 
 
  FALSE 
 *TRUE 
 
 
 
 


2   Multiple choice: What procedure should you complete before updating the image files on the PowerConnect 6024F? 
 
 
  Reset the switch to factory defaults. 
 Delete the access control list. 
 Enable the rapid spanning tree protocol. 
 *Backup the switch configuration file 

3   Multiple choice: What type of cable is used to interface with the serial console connection on the PowerConnect 6024F? 
 
 
  Coaxial cable 
 Straight Through cable 
 *Modem cable 
 Fiber cable 
   
 
 
 
4   True/False A Level-15 user account must be created on the PowerConnect 6024F before management over the ethernet network is possible. 
 
 
  FALSE 
 =TRUE 

 
 
  
 
 
 5   "Multiple choice: To reset the password on a PowerConnect 6024F, you should _____________" 
 
 
  use the default password 'secret'. 
 call Dell Technical Support. 
 replace the switch. 
 *press the reset button. 

6   True/False A full firmware flash on the PowerConnect 6024F does not delete user defined configuration settings. 
 
 
  FALSE 
* TRUE 
 
 
 7   Multiple choice: What command given at the Privileged Exec prompt saves the running configuration to the startup configuration on a PowerConnect 6024F? 
 
 
  move running config startup config 
 save current-config local-config 
 restore current-config startup-config 
 *copy running-config startup-config 
 
 
 8   True/False The PowerConnect 6024 has two operating system images. 
 
 
  FALSE 
* TRUE 
 
 
 9   "True/False Both PowerConnect 6024 and 6024F routers support VLAN (IEEE 802.1Q), Link Aggregation (IEEE 802.3ad) and Quality of Service." 
 
 
  FALSE 
 *TRUE 
 
 
 10   True/False The boot menu diagnostics can test the LEDs on the PowerConnect 6024. 
 
 
 * TRUE 
 FALSE 
 
 
 
 
 
 
 11   True/False The PowerConnect 6024 power supplies are hot-swappable. 
 
 
  FALSE 
 *TRUE 
 
 
 
 12   True/False You can use the default IP address to Telnet to the PowerConnect 6024.  
 
 
  FALSE 
* TRUE 
 
 
 
 13   True/False The PowerConnect 6024 has an integrated virtual cable tester. 
 
 
 * TRUE 
 FALSE 
 
 
 
 14   True/False The PowerConnect 6024 can pass network traffic through a LC-type fiber optic cable using a Small Form-factor Pluggable (SFP). 
 
 
 * TRUE 
 FALSE 
   
 15   True/False The PowerConnect 6024 circulation fans are hot-swappable. 
 
 
  FALSE 
 *TRUE 
 
 
 16   Multiple choice: What command from the command line will display the service tag number of a PowerConnect 6024F? 
 
 
  show name 
 switchname 
 *show system id 
 show servicetag 
 
 17   Multiple choice: What are the basic steps for restoring factory defaults on the PowerConnect 6024F? 
 
 
  *Delete the startup configuration and reboot the switch. 
 Click the reset button in the web interface under the Switch heading. 
 Press and hold the Mode button for 15 seconds while the switch boots. 
 Press the system reset button on the back of the switch. 
 
 
 
 
 18   "True/False On the PowerConnect 6024F, the integrated boot menu diagnostics mode is accessed via the web interface." 
 
 
 * FALSE 
 TRUE 
 
19   Multiple choice: What command from the command line displays the firmware version of a PowerConnect 6024F? 
 
 
  show firmware 
 show software 
 *show version 
 display firmware 
   
 
 20   Choose all that Apply What components are field replaceable on the PowerConnect 6024 and 6024F? 
 
 
  System Board 
*Power Supply 
*Small Form-factor Pluggable (SFP) 
*Circulation Fan 
  
 
 
*****************************************************************************************************************
 
 
 
 Multiple choice: What type of network server is required for uploading and downloading the configuration on a PowerConnect 6024? 
 
 
**  TFTP Server 
 Proxy Server 
 Mail Server 
 Web Server 
 
 

The process for resetting a PowerConnect 6024F to factory defaults includes deleting the startup configuration. 
 
 
  FALSE 
** TRUE