What type of tape drives are supported in the PowerVault 124T? LTO2 or LTO1 VS80 or VS160 VS80 or LTO1 == LTO2 or VS160 The customer says that they are having trouble with the video of their new Server. You have already checked the power connections, what should be your next step? Replace the video card Replace the VGA cable on the monitor = Test the monitor on another system to see if it works on another system Replace the faulty monitor How much time is required to perform a system reset on a PowerVault 124T, if there is currently a tape in the drive? Approximately four minutes == Approximately three minutes You cannot reset the system while a tape is loaded into the drive Approximately 30 seconds ?? If the PowerVault 124T is not able to successfully execute a Moving Tapes or an Inventory command, what command should be used to correct the situation? xx Library Operations Inventory = Sequential Operations Mode xx Set to Home How many tape magazines does the PowerVault 124T support? -== Two magazines Three magazines Four magazines The PowerVault 124T does not support magazines What are a few of the tools recommended for an emergency magazine removal for the PowerVault 124T? xx Two flathead screwdrivers, two Phillip’s head screwdrivers and a magnet xx A magnet and a flat plastic card No separate tools are needed for this procedure ==Torx driver, two flathead screwdrivers and a flat plastic card The customer reports that the PowerVault 124T did not complete the POST process successfully. What is one way that you can verify that the tape drive completed POST? xx The front panel of the PowerVault 124T will display the message System Ready and the current configuration. == The PowerVault 124T will have three audible beeps followed by a POST Completed message on the front panel. xx There is no way to tell if the PowerVault 124T has completed POST xx The PowerVault 124T will display the message System Shutdown Please Wait on the front panel once POST is complete Which data port type is used for accessing the remote web interface for the PowerVault 124T? == Ethernet SCSI Serial USB What is the PowerVault 124T’s default username and password for remote access via the web interface? == admin:password guest:guest root:calvin user:user What is the maximum data capacity of the PowerVault 124T with an LTO3 and two fully populated LTO3 tape cartridges? = 3.2TB 13.2GB 6.4TB 16.4GB In which of the following situations would you be required to perform an emergency magazine removal for the PowerVault 124T? The backup did not complete successfully == The unit will not power on. The SCSI ID is set incorrectly The cleaning tape requires replacement When in-putting the password to access the web interface for the PowerVault 124T, you are only able to access the Command and the Status areas of the menu. What is the issue? = You need to have the correct administrative password to access all menu items. Security needs to be activated on this machine before all menus will be available. You need to reset the system to factor defaults. Security information on the tape drive has become corrupt. An administrator needs to give you the correct user access. The PV124T derives its security through the system it is connected to. What is the PowerVault 124T’s default IP address for remote access via the web interface? 10.0.0.10 192.168.1.1 10.0.0.1 == 192.168.0.128 Which tape drive technology is supported on the PowerVault 124T? == LTO3 DLT4 DDS4 SDLT What file extension is used for the firmware update files on the PowerVault 124T? === *.img *.upd *.fmw *.flh How many field-replaceable units (FRUs) does the PowerVault 124T have? == Three; the system and the two magazines Two; the internal fibre bridge and the internal tape drive Five; the two internal tape drives, the two magazines and the internal fibre bridge xx One; the internal tape drive Which data port type is used for accessing the remote web interface for the PowerVault 124T? USB SCSI * Ethernet Serial