When removing the PV 745N SATA Auxiliary card, which of the following steps immediately follows the removal of the three securing screws?

   Lift the SATA Auxiliary card from the system. 
 Slide the SATA Auxiliary card from the system. 
= Carefully lift the SATA Auxiliary card to expose the SATA LED cable on the outside edge. 
 Pull the blue SATA cable guide straight up to remove it from the chassis. 






When removing the PV 745N processor fan assembly, why must all hard drive power cables be disconnected from the Power Distribution Board (PDB)?

=   The Power Distribution Board (PDB) is mounted to the processor fan assembly. 
 The hard drive power cables are mounted to the processor fan assembly. 
 The hard drive power cables are routed over the Power Distribution Board (PDB) and they must be disconnected so they may be moved out of the way. 
 The hard drive power cables do not have to be disconnected from the Power Distribution Board (PDB) when removing the Processor Fan Assembly. 



The PV 745N supports SCSI RAID for external storage enclosures only.

=   True 
 False 



In the PV 745N, at which of the following frequencies will the expansion slot operate if a 66-MHz PCI card is installed into the expansion slot?

   133 MHz 
 100 MHz 
= 33 MHz 
 66 MHz 


A USB key ships with every PV 745N.

=   True 
 False 


Choose all that apply:
Which of the following FRUs must be removed before removing the control panel from the PV 745N? 

=   Front bezel 
= Hard Drive carriers 
= Top cover 
 SATA Auxiliary card 


When removing the CPU from the PV 745N which of the following steps must be performed before rotating the Zero Insertion Force (ZIF) lever up?

   No steps must be performed before rotating the Zero Insertion Force (ZIF) lever up. 
 Slide the heat sink retainer lock towards the front of the server approximately 1/4 inches. 
= Pull the Heat Sink to remove it from the system. ??
 Slide the heat sink retainer towards the back of the server approximately 1/4 inches. 

 


What capacity USB key must be used with the USB Key Preparation Utility on the PV 745N?

   32 MB 
= 64 MB 
 128 MB 
 256 MB 



Which of the following is true regarding the USB Key Preparation Utility that ships with the PV 745N? 

=   Running the USB Key Preparation Utility destroys all data that may exist on the key. 
 It can be used to boot a system when the system BIOS has become corrupted. 
= The USB Preparation tool cannot detect a USB key that has been partitioned in Windows. 
= It is used to prepare a USB key for the purposes of re-installing the Windows Powered operating system, running diagnostics, and updating the BIOS version on a PV 745N. 




In which of the following PV 745N configurations would you need to remove the Hot Plug cable assembly?

   When the PV 745N is in either a hardware or software RAID configuration. 
= When the PV 745N is in a hardware RAID configuration. 
 The PV 745N does not have a Hot Plug Cable Assembly. 
 When the PV 745N is in a software RAID configuration.