90ÇÁ·Î = The PowerVault 715N is secured to the rapid rails in the rack with: = Two front mounting brackets Two M3 x 5-mm pan-head Phillips screws A # 1 Phillips-head screw Six 10-24 x 0.375-inch pan-head Phillips screws =The four stacking feet should be removed from the PV725N first before installing the system in a rack. False = True =Which of these file sharing and file transfer protocols are supported by the Dell PowerVault 75xN NAS appliance? = Common Internet File System (CIFS) Internet File Exchange (IFX) = Network File System (NFS) = File Transfer Protocol (FTP) =The integrated PERC 3/Di RAID controller is used for the internal storage on a Dell PowerVault 75xN NAS appliance. = True False =The function of the cable tray attached to the back of the PV725N when installed in a rack is to: Secure cables to the system = Prevent cable slack from interfering with other systems in the rack = Support cables between the system and cable management arm = Add strain releif for the cables =Before removing a HDD from the PowerVault 715N, the HDD carrier must first be removed from the chassis. False = True =The system board is secured to the chassis in the PowerVault 715N with: Four black securing latches The HDD backplane = A thumbscrew = Three black securing latches =A USB key ships with every PV 745N. = True False ?Which of the following is true regarding the USB Key Preparation Utility that ships with the PV 745N? = Running the USB Key Preparation Utility destroys all data that may exist on the key. It can be used to boot a system when the system BIOS has become corrupted. The USB Preparation tool cannot detect a USB key that has been partitioned in Windows. It is used to prepare a USB key for the purposes of re-installing the Windows Powered operating system, running diagnostics, and updating the BIOS version on a PV 745N. =In the PowerVault 715N, PCI adapter cards are inserted into the: Slot on the backplane PCI slot on the riser card = PCI slot on the system board External adapter =In the PV 745N, at which of the following frequencies will the expansion slot operate if a 66-MHz PCI card is installed into the expansion slot? 66 MHz = 33 MHz 133 MHz 100 MHz =The system fan is held in place in the PowerVault 715N with: A thumbscrew The power supply =The top cover Two screws =What must be done before removing the processor from the PowerVault 715N: = Lift the ZIF connector handle Remove the processor fan Remove the system board = Remove the heat sink =The PV 745N supports SCSI RAID for external storage enclosures only. False = True =When removing the CPU from the PV 745N which of the following steps must be performed before rotating the Zero Insertion Force (ZIF) lever up? = Slide the heat sink retainer lock toward the front of the system approximately 1/4 inches. No steps must be performed before rotating the Zero Insertion Force (ZIF) lever up. = Pull the heat sink to remove it from the system. = Slide the heat sink retainer toward the back of the system approximately 1/4 inches =In which of the following PV 745N configurations would you need to remove the Hot Plug cable assembly? The PV 745N does not have a Hot Plug Cable Assembly. When the PV745N is in a software RAID configuration = When the PV745N is in a hardware RAID configuration When the PV 745N is in either a hardware or software RAID configuration. =The backplane and backplane logic board for the Dell PowerVault 750N peripheral bay hard drive cage are two separate pieces. = True False =Which of the following FRUs must be removed before removing the control panel from the PV 745N? = Hard drive carriers = Top cover = Front bezel SATA auxiliary card =How many hard-disk drives may be installed in the peripheral bay hard drive cage on the Dell PowerVault 750N? = 2 8 1 5 =Which of the following cables must be disconnected from the 1x1 backplane on the Dell PowerVault 755N media bay hard drive cage? Interposer data cable = SMB cable = SCSI cable = Backplane power cable =The Dell PowerVault 77xN offers ActiveArchive Snapshot functionality. = True False =On which Dell PowerEdge Server platform is the Dell PowerVault 775N based? None of these - the Dell PV775N does not share its base design with any Dell PowerEdge server products. Dell PowerEdge 2450 = Dell PowerEdge 2650 Dell PowerEdge 2550 =How are the OS Hard-Disk Drives configured on a Dell PowerVault 77xN? RAID-1/0 across four internal hard-disk drives. = RAID-1 across two internal hard-disk drives. RAID-5 across two internal hard-disk drives. A single internal hard-disk drive =The optional Embedded Remote Assistant (ERA) on the Dell PowerVault 77xN can be configured via the Advanced Administration Menu. = True False =The PowerVault715N features the following expansion bus: Two PCI slots = One 32-bit PCI slot on a riser board One 32-bit PCI slot on the system board One ISA slot =The PowerVault 715N is different from the PowerVault 705N in that it supports RAID 0, 1, and 5. = False True =If a replacement system board for a Dell PowerVault 77xN is incorrectly shipped with a Dell PowerEdge 26x0 BIOS installed, which command-line switch may be used to properly update the BIOS? -systemtype = -brandname -NAS -setsystem \ Which option on the PowerVault 77xN Advanced Administration Menu can be used to backup the Windows Registry and other system files for the NAS appliance? Removable Storage Disk Management \ Perform System State Backup Performance Monitor = The PowerVault 715N supports the following operating system: SNAP OS UNIX = Microsoft Windows powered with SP2 Microsoft Windows NT 4.0 =The PowerVault 715N supports the following minimum and maximum memory. 128 MB 4 GB = 1 GB = 256 MB =The PowerVault 715N contains the following communication ports: = Two RJ45 Ethernet connectors A keyboard port connector = A 9-pin serrial connector A parallel port connector =The PowerVault 715N may contain a PCI SCSI controller for: = An external tape drive The CD-ROM drive RAID support The four hard-disk drives \ The PV725N hard-disk drives are configured with the following RAID levels: \ 5 3 \ 1 \ 0 =The PV725N is shipped from Dell with two copies of the operating system installed on the hard-disk drives. False = True =The PV725N contains four cool swap hard-disk drives. = True False =The front bezel must first be removed from the PowerVault 715N before mounting it into a Dell rack. True = False \ The PV725N contains ________ integrated NICs. \ 2 0 1 3 ??Which of the following are true regarding the use of the Dell PowerVault 75xN Reinstallation CD. There are configuration steps that should be completed after using the Reinstallation CD to reload the OS image. Any data stored on the Dell PowerVault 75xN OS drives will be lost. The Dell PowerVault 75xN cannot be configured to use a static IP address; only DHCP is supported. The system BIOS must reflect that the system is a Dell PowerVault 75xN, and not a Dell PowerEdge 25x0, before the Reinstallation CD can be used. =The Dell PowerVault 75xN Reinstallation CD is a bootable CD that automatically reloads the OS image for the NAS Appliance. = True False =The PV725N contains the following cooling devices: = HDD cooling fan = CPU heatsink = CPU cooling blower = PCI cooling fan =The PowerVault 75xN Advanced Administration Menu can only be accessed by logging into the PowerVault 75xN locally. True = False =The PCI riser card plugs into a connector on the top surface of the PV725N system board. True = False =From which CD can the Dell Server Online Diagnostics be installed? Dell PowerVault 75xN Reinstallation CD. = Dell PowerVault 75xN Resource CD. Dell PowerVault 75xN Localization CD. Dell PowerVault Appliance Assistant CD. =Which of the following utilities are available from the Network Tools entry on the Dell PowerVault 75xN Advanced Administration Menu? = Tracert Nbtstat = Ping = Nslookup =Which menu in the Dell PowerVault NAS Manager contains the Online Server Diagnostics entry? Welcome = Maintenance Network Status =Dell Server Online Diagnostics require the Sun Microsystems Java2 Runtime Environment (JRE) to be installed on the system from which the diagnostics are being run. = True False =The system board is secured to the PV725N chassis with: Two blue retaining cams Blue retaining latch = Blue thumb-screw Three screws =Remove the following component before removing a hard-disk drive from the PV725N: Hard-disk drive power connector SCSI controller = Front bezel Top cover =The PCI cooling fan sets into the PV725N chassis and is not secured with a screw or strap. False = True =During reassembly of the HDD and carrier, ensure the IDE cable is inserted correctly on the PV725N by: Inserting the cable connector into the board first = Matching the connector with the cable Inserting the cable connector into the HDD first Reading the label on the cable =The CPU blower is secured to the PV725N chassis with: Two Phillips-head screws A strap A clamp = Nothing =Remove the following from the PV725N first before removing the CPU heatsink: CPU = Top cover = CPU cooling blower PCI cooling fan =The amount of space required to install a PowerVault 715N in a Dell rack is: 1.78 inches 2 U 5 U = 1 U