The management port on the AX100i storage processor is a 10/100 Mb connection. 

*   TRUE  
 FALSE 

The iSCSI ports on the AX100i do not have a link speed LED since it is hard set to 1 Gb full duplex. 

*   FALSE 
 TRUE 

You should run the Storage System Initialization Utility before installing the MS iSCSI initiator software. 

*   FALSE 
 TRUE 


AX100i iSCSI ports attached to a 1 Gb Ethernet switch is supported. 

*   TRUE 
 FALSE 


What might an 'Authentication Failure' message indicate when configuring the MS iSCSI initiator software for the AX100i? 

  The MS iSCSI initiator software was corrupted during the install.  
* The CHAP user name or secret does not match between the host and storage array.  
 There is a duplicate IP address being used on the network.  
 PowerPath needs to be reinstalled.  


What is the maximum number of initiators that can be attached to the AX100i? 

*   16 
 10 
 12 
 5 


Which item is NOT a FRU? 

   Power Supply  
* Hard-disk Drives  
 Dual In-line Memory Module  
 Processor  


What type of security is supported on the AX100i? 

*   CHAP 
 IPSec 
 PAP 
 EAP 


What type of hard-disk drives are supported on the AX100i? 

   Fibre Channel  
 SCSI Ultra 320  
 Parallel ATA 
* Serial ATA  


What does a lit amber LED on the AX100i battery back-up cache card indicate? 

   Data  
 Power  
* Critical Failure  
 Missing Memory  

What is unique about a single storage processor AX100i? 

   There are two iSCSI ports instead of one.  
* There is a battery back-up cache card installed.  
 There is a UPS port on the storage processor.  
 Only six hard disk drives are supported.  


The AX100i storage processor suitcase it hot swappable. 

   TRUE 
* FALSE 


What is the maximum number of hosts that can attach to the AX100i? 

 12 
  2 
 4 
=== 8 

Which FRU must be removed before replacing the AX100i SP suitcase? 

   Power Supplies  
 Hard Disk Drives  
= CPU Fan  
 Dual In-line Memory Modules  



When should you run the Server Utility on the AX100i? 

= To give the attached server access to the storage system.  
 To configure the iSCSI IP addresses  
 To update the AX100i firmware  
 Before installing the iSCSI initiator software  

How many iSCSI ports are on a single storage processor AX100i? 

= 1
 4 
 2 
 3 

??The Storage System Initialization Utility is used to ________ 

   Create a user account for accessing the storage system.  
 Delete all RAID groups.  
 Set IP addresses for the storage processors.  
 Format the virtual disks.  



The AX100i storage processor suitcase it hot swappable. 

  == FALSE 
    TRUE 


The AX100i iSCSI NIC ports attached to a public local area network are supported.

   FALSE 
= TRUE